Description
DMC839 WIRING SYSTEM SERVICE KIT For the FOKKER 50 & 100
THE MAINTENANCE PROBLEM…
Modern aircraft , such as the Fokker 50 & 100, have complicated electrical wiring systems containing many different connectors, contacts and terminals, the repair of which require precision tools. It is not a cost effective use of the time of your technical staff to start from scratch and try to become intimately knowledgeable about which precision tools must be used to repair each electrical connector, contact and terminal when DMC has already performed this task for the Fokker 50 & 100.
AOG TIME CONSTRAINTS.
Once the aircraft becomes inoperable because of a connector failure, it is imperative to be able to replace the connector, contact or terminal as quickly as possible to avoid revenue loss due to AOG. The DMC839 kit supplies your staff with both the information and the tools necessary to make this type of repair to the Fokker 50 & 100 in the shortest time possible.
THE DMC SOLUTION…
TOOLING RESEARCH.
DMC has already researched the list of connectors for the Fokker 50 & 100 and has identified the most common tools required to maintain the electrical connectors in the Fokker 50 & 100. DMC has cross referenced tools to the connectors, contacts and terminals eliminating costly and time-consuming research which would otherwise have to be performed by your local technicians.
IMMEDIATE AVAILABILITY OF TOOLS
AND TECHNICAL INFORMATION.
The DMC839 kit contains all of the tooling to connector, contact and terminal cross reference information needed to support the Fokker 50 & 100. In addition, the kit also contains illustrated?operating instructions for the required tooling.
ALL IN ONE. Since all of these tools, together with their operating instructions,are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your Fokker 50 & 100 to service. Tool kit supplied in an environmentally sealed fiberglass case and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Charts, and Tool Selection Charts.
DMC839 TOOL AND ACCESSORY LIST
5 Crimp Tools
14 Positioners
6 Turret Heads
9 Die Sets
1 Single Position Head
1 Hex Wrench
2 In-Service Inspection Gages
11 Metal Insertion Tools
12 Metal Removal Tools
70 Plastic Ins/Rem Tools
4 Contact gages
2 Unwired Contact Removal Tools w/ Probes
1 Wire Cutter
2 Wire Strippers
1 Die Removal Tool
2 Wire Stripper Blade Packs
1 Wire Cutter w/ Cushion Grip
1 Insertion/ Removal Tool w/ Tips
DMC839 CONNECTOR COVERAGE
MANUFACTURER SERIES
AMP PIDG, Solistrand, Terminyl, Insulated/Uninsulated Terminals and Splices
Bendix ECD JT/LJT Series
Deutsch Common Termination System, DBA, DL Series, Jiffy Junctions
Hellermann Deutsch LL Series
Deutsch Relays Relay Sockets
Graviner Fire/Overheat Detection Connectors
Honeywell Switches
ITT Cannon BAKD/BKAE, CV, D*MA, DPA, DPX, DPX2/3, KJ, KM, PV Series
Jay-El Pushbutton Switches
Leach Relay Sockets
Ledveco LRS Series
Matrix Science MB, MT, 944 Series
Raychem Thermofit Environmental Splices
Specialty Connector RF Coaxial
Souriau 852 Series
Viking Thorkom Series
