Tools and Dies for Crimping Terminals and Splices
Terminal and Splice Crimp Die Tooling
DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools.
NOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
26 to 10 AWG Tooling Options
Pneumatic or Hydraulic tool options prefered for 10-12 AWG Range.
HX4 TOOL SERIES OPTIONS FOR Y-DIES |
||
HX4 | Hand Crimp Tool | |
UDT4 | Upside Down Hand Crimp Tool | |
HXE4B | Battery Hydraulic Crimp Tool | |
HX23 | Pneumatic Crimp Tool |
M22520/40-01 TOOL OPTIONS |
||
AMT4001 | Hand Crimp Tool |
HX3 TOOL SERIES OPTIONS FOR X-DIES |
||
HX3 | Hand Crimp Tool | |
PHX3 | Pneumatic Crimp Tool |
GMT TOOL SERIES OPTIONS |
||
GMTxxx | Hand Crimp Tool | |
GMTExxxB | Battery Hydraulic Crimp Tool |
DCT TOOL SERIES OPTIONS |
||
DCT4 | Hand Crimp Tool | |
DCTE4B | Battery Hydraulic Crimp Tool |
8 to 4/0 AWG Tooling Options
HX4 TOOL SERIES OPTIONS FOR Y-DIES |
||
HD37 | Hydraulic Hand Crimp Tool | |
HX23 | Pneumatic Crimp Tool |
HD36 TOOL SERIES OPTIONS |
||
HD36 | Hydraulic Hand Crimp Tool | |
HDE36B | Battery Hydraulic Crimp Tool |
HD51 TOOL SERIES OPTIONS |
||
HD51 | Hydraulic Hand Crimp Tool | |
XHD51** | Pneumatic/Hydraulic Crimp Tool** | |
**Hydraulic pump, hose and accessories sold seperately. |
TOOL OPTIONS FOR HD002, HD485 & HD442 DIES |
||
HH80C | Hydraulic Hand Crimp Tool | |
TBHD1M** | Pneumatic/Hydraulic Crimp Tool** | |
**Hydraulic pump, hose and accessories sold seperately. |