DMC Product Tutorial Videos – CRiMP-TECH AUSTRALIA

PRODUCTS
- Backshell ToolingThe evolution of circular connectors has produced a multitude of configurations which have more precise dimensional tolerances and electrical characteristics than any other mechanical component used in modern electrical systems. The associated tooling must meet the same level of precision to apply the connector to its intended purpose. Until now, very little attention has been focused on the tooling which is used to mount strain-relief backshells and other accessories to wired connector assemblies. This is why the BETA® system was developed.
- Banding ToolsThe termination of EMI/RFI shielding materials is a specialised science in today’s aerospace wiring systems. Application tooling is a critical factor in the overall performance of the wiring system components. DMC has worked closely with the world’s leading connector accessory manufacturers and standards organisations to develop the necessary tooling and accessories to meet the stringent demands of aerospace and defence system contractors. The resulting products afford the user a repeatable and reliable means of terminating shielding on aerospace wiring systems. Tooling is available for all bands qualified to AS85049/128
- Battery Crimp ToolsCrimp-Tech Australia has a range of battery operated crimp tools to crimp a wide range of contacts, terminals and splices . We believe the following information and data will answer your questions. If not please contact us for personalized service. Working on today’s electrical connections calls for increased mobility and repeatable, consistent crimping force so we offer a wide range of battery powered crimp tools designed to integrate with your current tooling systems. These battery powered tools offer the mobility of a hand tool without sacrificing the power of pneumatic tools. In the field or on the factory floor, every tool crimps with the consistency and precision you expect from DMC products. The ergonomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high. DMC battery powered tools have been engineered to work with our existing die series and compliment our established crimp tool lines. And, as always, if we don’t have a die to meet your needs, we will engineer and manufacture it for you. So if your workload is too much for hand tools, or pneumatic hoses and power cables are unwelcome, unsafe or impractical for the work environment, a battery powered…
- Connectors
- Crimp Tool GaugesWith the need to ensure that your tooling die sets, positioners, turret heads and also the indent crimp tools is in calibration and conforms to the required standards, DMC have a large range of GO NO-GO Gauges available for a variety of applications. If you do not know the required GO NO-GO gauge please contact us for assistance.
- Cutting & Stripping ToolsCable preparation is an essential part of wiring system practices, and have the right tool to prepare our cable for crimping of contacts, terminals or lugs is critical. It is important not to damage the insulation on conductors, cable shielding or damage the copper or fibre that will be transmitting the signal down you cable.
- DMC Tool KitsBuilding a tool kit to service an entire wiring system involves extensive research to select to correct tooling and ensure all serviceable connectors, terminals, splices and contacts are covered. Technicians who are responsible for the maintenance or production of entire systems cannot be expected to know all the answers, nor do they have the time to do the necessary research or locate tooling. Crimp-Tech and DMC has this knowledge and does the technical research for them.
- Hand Crimp ToolsCrimp-Tech Australia offers a range of Military and Commercial Hand Crimp Tools. Here you will find a range of these products, if the particular tool you are looking for is not listed please contact us.
- Harting Tool Kits
- Heat GunsHeat Guns and Hot Air Hand Tools
- Hydraulic Crimp Tools
- Insertion/Removal ToolsDMC is dedicated to serving the connector tooling needs of the electronics industry. We, therefore, top off our product package with a wide variety of installing and removal tools. Although we supply both plastic and metal tools, we recommend the use of the metal tools because of their durability. When used properly they are more cost effective in that they withstand thousands of contact insertion and removal cycles. The trend to all metals tools is being actively encouraged by most departments of the government. DMC installing and removal tools are of proven high quality and reliability. In addition to the tools listed in these reference table, we have many more for other connector applications. Please contact us for more details.
- LaceLok®LaceLok® Cable Lacing Fasteners are used as secondary support for cable and wire bundling. Developed to replace cable ties and hand tied lacing tape, LaceLok® provides an ergonomic solution for consistent bundling with unrivaled strength and superior performance.
- Misc Tools
- Pneumatic Crimp Tools
- Safe-T-CableSafe-T-Cable™ is constructed of high tensile strength, stranded cable. It is more flexible than its Safety Wire counterpart, although the working diameters are equivalent. This provides a stronger assembly which has greater strength and lighter weight. The cable ends are electrically fused to form an easy threading end.
- Terminals
- Test EquipmentTest Equipment
- Torque Wrenches
Tooling Guides
Resources
About Us
Contact Us
FAQ
- News
Log In/Register
- My Quote
Search for:

TSK8000 Twist Strip for Shielded Twisted Cable Prep (product video)

The DMC Twist-Strip TSK8000 outer jacket removal tool for shielded twisted cable gives the user a system with maximum capabilities, while keeping the system portable, self-contained, affordable, and ergonomic. The precise blade adjustment, zero friction ball bearing design, articulating/locking arms, and changeable dies makes the TSK8000 very user-friendly and efficient when performing the difficult task of cable preparation.

TSK8000 Twist Strip for Shielded Twisted Cable Prep (tutorial video)

Safe-T-Cable – Save Time and Money by Replacing Your Old Lockwire System with Safe-T-Cable (product video)

Safe-T-Cable® was invented to address these problems in modern Airframe and Engine Systems. The Safe-T-Cable® Kits are consistent in their construction/ application, and the user-friendly tooling guarantees a secure and reliable installation each time it is used. Operator training is simple, Inspection is objective, and rework is virtually eliminated.

Safe-T-Cable – Save Time and Money by Replacing Your Old Lockwire System with Safe-T-Cable (tutorial video)

We demonstrate DMC’s Safe-T-Cable Crimp Tools, SCT series and SCTR series.

AF8 & AFM8 (tutorial video)

The M22520/1-01 (AF8) and M22520/2-01 (AFM8) are utilized throughout the High Reliability Wiring industry. We demonstrate the proper use of DMC’s AF8 and AFM8 Crimp Tools.

HX4 M22520/5-01 (tutorial video)

The M22520/5-01 (HX4) is utilized throughout the High Reliability Wiring industry. We demonstrate the proper use of DMC’s HX4 open frame crimp tool.

GMT232 (tutorial video)

The M22520/37-01 (GMT232) environmental splice tool is utilized throughout the High Reliability Wiring industry. We demonstrate the proper use of DMC’s GMT Crimp Tool.

G125 Go/No-Go (tutorial video)

The M22520/3-01 (G125) Go/No-Go gage is used with the AF8 and AFM8 tools. Gaging is important to verify these crimp tools are ready for production use and meet the manufacturers performance expectation.

HX23 Pneumatic Open Frame Tool (tutorial video)

The HX23 is the pneumatic version of the popular M22520/5-01 open frame crimp tool.

HD51 (M5259/4-01) XHD51 (M5259/5-01) HDE51B (tutorial video)

This line of medium-duty hydraulic crimp tools provides 5.5 tons of crimp force for 8 – 2/0 AWG. All tools share the same dies.

WA23 Pneumatic Crimp Tool (tutorial video)

The WA23 M22520/23-01 heavy duty crimp tool accommodates large size contacts 8 through 0000 (AWG).

Insertion and Removal Tools (tutorial video)

We demonstrate how to properly use insertion and removal tools with a circular connector

Connector Training Video (tutorial video)

DMC has produced a training video which will give assembly personnel many illustrations of efficient tool use and visually establish an understanding of the delicate nature of electrical connectors, contacts, and other components. This material will also be of benefit to engineers, specifiers, production supervisors, and procurement personnel.

HXE4B Battery Tool (tutorial video)

We demonstrate how to properly use the HXE4B battery tool.