Description
DMC441 WIRING SYSTEM SERVICE KIT For the BELL 206/206L
THE MAINTENANCE PROBLEM…
Modern aircraft, such as the BELL 206 and 206L, have complicated electrical wiring systems containing many different connectors, contacts and terminals, the repair of which require precision tools.
It is not a cost effective use of the time of your technical staff to start from scratch and try to become intimately knowledgeable about which precision tools must be used to repair each electrical connector, contact and terminal when DMC has already performed this task for the BELL 206 and 206L.
AOG TIME CONSTRAINTS. Once the aircraft becomes inoperable because of a connector failure, it is imperative to be able to replace the connector, contact or terminal as quickly as possible to avoid revenue loss due to AOG. The DMC441 kit supplies your staff with both the information and the tools necessary to make this type of repair to the BELL 206 and 206L in the shortest time possible.
THE DMC SOLUTION…
TOOLING RESEARCH. DMC has already researched the list of connectors for the BELL 206 and 206L and has identified the most common tools required to maintain the electrical connectors in the BELL 206 and 206L. DMC has cross referenced tools to the connectors, contacts and terminals eliminating costly and time-consuming research which
would otherwise have to be performed by your local technicians.
IMMEDIATE AVAILABILITY OF TOOLS AND TECHNICAL INFORMATION. The DMC441
DMC441 kit contains the tooling to connector, contact and terminal cross reference information which indicate the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the required tooling.
ALL IN ONE. Since these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible,
thus permitting a rapid return of your aircraft to service. Tool kit supplied in an environmentally sealed fiberglass case and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Charts, and Tool Selection Charts.
DMC441 WIRING SYSTEM SERVICE KIT For the BELL 206/206L
DMC441 TOOL AND ACCESSORY LIST
6 Crimp Tools
4 Turret Heads
4 Positioners
3 Die Sets
7 Metal Insertion Tools
8 Metal Removal Tools
71 Plastic Ins/Rem Tools
3 Contact gages
1 Unwired Contact Removal Tools w/ Probes
2 Wire Strippers
1 Die Removal Tool
1 Hex Wrench
1 Coaxial Cable Stripper
1 Wire Cutter
1 In-Service Inspection Gage
DMC441 CONNECTOR COVERAGE
MANUFACTURER SERIES
MIL-C-26482 Series 1
MIL-C-5015 3400, 3450 Series
MIL-R-6106 Relays
MIL-S-12883 Relay Sockets
MIL-T-7928 Insulated Terminals/Splices
MIL-T-81714 Common Termination System
Amp Mate-N-Lok Series
Amphenol RF Coaxial
Collins Radio Microline Series
Deutsch DM Series
Hartman Insulated Terminals
ITT Cannon CA-KE, D*C, MS-K Series
Molex Single Side Edge Connectors
Winchester MRAC Series
