Bootlace - End Terminals
Elpress pre-insulated and uninsulated end terminals are made of tin-plated copper. The end sleeves have measurements as per DIN 46228 (not TWIN). The insulation sleeve is made of PP (polypropene) and have a shape that is comparable with the easy-entry principle.
Easy-entry
It is easy to guide the cable properly in the cable clip as the insulation sleeve is of an “easy-entry” type, which means that it guides the cable correctly in the clip.
Avoid splayed strands
End sleeves are used when a perfect connection on a cable end is needed. With our end sleeve, you avoid splayed strands and reduce the risk of cable breakage. Moreover, they create a lasting contact pressure and a large contact area. Upon crimping, a trapezoidal or square geometry is formed.
When using our crimping tools and end sleeve, a connection is obtained that meets the requirements according to VDE 0609.
CSA certification
CSA, Canadian Standards Association, is a Canadian organisation that certifies products according to US standards. Elpress end sleeves of type A..ET / ETT / ETD, B. .. ET, A…ET2/ETT2/ETW2 is CSA certified according to US standard C22.2 No 158 and UL 1059 according to file No. 247206. End sleeves of type A..ET/B…ET/A…ET2 are intended for few-wire Cu cables 26 AWG to 500 MCM, corresponding to the metric size 0.14 mm2 to 240 mm2. Shall be used together with Elpress crimping tool
Showing 1–12 of 44 results