Description
DMC1700C WIRING SYSTEM SERVICE KIT For The F-35 Lightning II (JSF)
THE MAINTENANCE PROBLEM…
Modern aircraft, such as the Joint Strike Fighter (JSF), have complicated electrical wiring systems containing many different connectors, contacts and terminals, the repair of which require precision tools.
It is not a cost effective use of the time of your technical staff to start from scratch and try to become intimately knowledgeable about which precision tools must be used to repair each electrical connector, contact and terminal when DMC has already performed this task for the JSF.
AOG TIME CONSTRAINTS.
Once the aircraft becomes inoperable because of a connector failure, it is imperative to be able to replace the connector, contact or terminal as quickly as possible to avoid loss of mission capability due to AOG. The DMC1700C kit supplies your staff with both the information and the tools necessary to make this type of repair to the JSF in the shortest time possible.
TOOLING RESEARCH.
DMC has already researched the list of connectors for the JSF and has identified the most common tools required to maintain the electrical connectors in the JSF. DMC has cross referenced these tools to the connectors, contacts and terminals, eliminating costly and time-consuming research which would otherwise have to be performed by your electrical technicians.
IMMEDIATE AVAILABILITY OF TOOLS AND TECHNICAL INFORMATION.
The DMC1700C kit contains all of the tooling to connector, contact and terminal cross reference information needed to support the JSF. In addition, the DMC1700C kit also contains illustrated operating instructions for the required tooling.
ALL IN ONE.
Since all of these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your JSF to service. Tool kit supplied in 5, environmentally sealed, green-fiberglass cases and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Charts, and Tool Selection Charts.
| DMC1700C CONNECTOR COVERAGE | |
| MANUFACTURER | SERIES |
| MIL-C-24308 | D-SUB |
| MIL-C-26482 | II |
| MIL-C-38999 | I, II, III |
| MIL-C-39012 | RF Coaxial |
| MIL-C-5015 | 3400, 3450 |
| MIL-C-83723 | III |
| MIL-C-81511 | III, IV |
| MIL-S-12883 | Relay Sockets |
| MIL-S-81824 | Environmental Splices |
| MIL-T-81714 | Terminal Junctions |
| Deutsch | “RE Series” |
| Gore | Circular |
| JSFC14/JSFC15/ JSFC16 | JSF Standard |
| JSFC32 | JSF Standard |
| JSFC35 | JSF Standard |
| JSFC43 | JSF Standard |
| JSFC44 | JSF Standard |
| JSFC46 | JSF Standard |
| JSFC48 | JSF Standard |
| JSFC51 | JSF Standard |
| JSFC53 | JSF Standard |
| JSFC55 | JSF Standard |
| JSFC57 | JSF Standard |
| JSFC59 | JSF Standard |
| JSFC63 | JSF Standard |
| JSFC70 | JSF Standard |
| JSFC73/JSFC74 | JSF Standard |
| JSFC83 | JSF Standard |
| JSFC92 | JSF Standard |
| JSFC94 | JSF Standard |
| JSFC98 | JSF Standard |
| JSFC109 | JSF Standard |
| JSFC134 | JSF Standard |
| JSFC142 | JSF Standard |
| JSFQ05 | JSF Standard |
| JSFQ08/JSFQ09/JSFQ10 | JSF Standard |
| JSFQ14 | JSF Standard |
| JSFQ16 | JSF Standard |
| JSFQ20 | JSF Standard |
| JSFQ24 | JSF Standard |
| JSFQ54/JSFQ55 | JSF Standard |
| JSFQ57 | JSF Standard |
| JSFQ72 | JSF Standard |
| JSFQ81 | JSF Standard |
| Times Microwave | – |
| Trompeter | 150/3105 |
| DMC1700C TOOL AND ACCESSORY LIST | |
| Quantity | Description |
| 13 | Crimp Tools |
| 6 | Turret Heads |
| 23 | Positioners |
| 4 | Single Position Heads |
| 48 | Metal Ins/Rem Tools |
| 111 | Plastic Ins/Rem Tools |
| 4 | Contact gages |
| 3 | Unwired Contact Removal Tools |
| w/ Probes | |
| 1 | Wire Cutter |
| 2 | Wire Strippers |
| 9 | In-Service Inspection Gages |
| 1 | Die Removal Tool |
| 19 | Die Sets |
| 1 | Hex Wrench |
| 73 | Adaptor Tools |
| 2 | T-Handle Wrench |
| 2 | Strap Wrench |
| 4 | Coaxial Cable Stripper |
| 1 | Soft Jaw Pliers w/ extra inserts |
| 2 | Cable Pullers |
| 2 | Spanner Wrenches |
| 1 | Pneumatic Crimp Tool |
| 5 | Pneumatic Die Sets |
| 5 | Pneumatic Locators |
| 1 | Hydraulic Crimp Tool |
| 7 | Hydraulic Die Sets |
