Description
DMC769 WIRING SYSTEM SERVICE KIT For the BOEING 737
THE MAINTENANCE PROBLEM…
Modern aircraft , such as the Boeing 737, have complicated electrical wiring systems containing many different connectors, contacts and terminals, the repair of which require precision tools.
It is not a cost effective use of the time of your technical staff to start from scratch and try to become intimately knowledgeable about which precision tools must be used to repair each electrical connector, contact and terminal when DMC has already performed this task for the Boeing 737.
AOG TIME CONSTRAINTS.
Once the aircraft becomes inoperable because of a connector failure, it is imperative to be able to replace the connector, contact or terminal as quickly as possible to avoid revenue loss due to AOG. The DMC769 kit supplies your staff with both the information and the tools necessary to make this type of repair to the Boeing 737 in the shortest time possible.
THE DMC SOLUTION…
TOOLING RESEARCH.
DMC has already researched the list of connectors for the Boeing 737 and has identified the most common tools required to maintain the electrical connectors in the Boeing 737. DMC has cross referenced tools to the connectors, contacts and terminals eliminating costly and time-consuming research which would otherwise have to be performed by your local technicians.
IMMEDIATE AVAILABILITY OF TOOLS AND TECHNICAL INFORMATION.
The DMC769 kit contains all of the tooling to connector, contact and terminal cross reference information needed to support the Boeing 737. In addition, the kit also contains illustrated operating instructions for the required tooling.
ALL IN ONE.
Since all of these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your Boeing 737 to service. Tool kit supplied in an environmentally sealed fiberglass case and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Charts, and Tool Selection Charts.
DMC769 TOOL AND ACCESSORY LIST
4 Crimp Tools
8 Positioners
3 Turret Heads
16 Die Sets
1 Single Position Head
1 Hex Wrench
1 In-Service Inspection Gage
12 Insertion Tools
14 Removal Tools
48 Plastic Ins/Rem Tools
4 Contact gauges
2 Unwired Contact Removal Tools
w/ Probes
1 Wire Cutter
3 Wire Strippers
1 Die Removal Tool
1 Firewall Connector Wrench TOOL
DMC769 kit contains all of the tooling to connector, contact and terminal cross reference information needed to support the Boeing 737
DMC769 CONNECTOR COVERAGE:
AMP AMP-TAB, AD/AM
Amphenol Aerospace/Bendix 8, (MIL-C-26500), Special Wire Splice, 84 Series BNC Series, PT, PT-SE, Pygmy Series
Burndy Smooth Bantam, L Series
Deutsch DS Series
Fenwal Fire Detector Connectors
Transtechnology Corp. FC3400 Series (MIL-C-5015), 3400 Series
ITT Cannon BKA Series, D*MA Series, DPAMA, DPD, DPD*MB, DPE, DPX*MA, FRF, XLR
Kings Electronics KD, KN, KC Series, BNC Type, N, C
Matrix Science MT Series, Specials, TT30K, MIL-CL83723 Series III
Pyle National Firewall Connectors
Souriau S600 (ARINC 600)
Switchcraft 2J
Cinch Connector Nuline Connectors C48 Series, CN0967 Series, C0909A Series
Walter Kidde Fire Detection Connectors
MIL-C-26482 Series 1
MIL-C-26500 Circular
MIL-S-81824 Environmental Splices
MIL-T-7928 Type II Class I Size 12-10 AWG and Smaller
Military Standard MS/AN
TOOL KIT CONFIGURATION:
Type of Case: Portable
Number of Cases: 1
Color: Yellow
Type of Construction: Fiberglass/Aluminum
Application: Boeing 737-200, -300, -400, -500 Series
Coverage: Airframe Power Connectors, Terminals size 12 AWG and Smaller, Coaxial Connectors
Type of Inserts: Unicellular Polyethylene Foam with Die Cut Tool Cavities
Tool kit supplied in an environmentally sealed fiberglass case and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Charts, and Tool Selection Charts.
