Description
DMC1907 Wiring System Maintenance Kit for the Sikorsky CH-60/HH-60M/MH-60R/UH-60M
THE MAINTENANCE PROBLEM…
Modern aircraft, such as the Sikorsky Blackhawk, have complicated electrical wiring systems containing many different connectors, contacts and terminals, the repair of which require precision tools. It is not a cost effective use of the time of your technical staff to start from scratch and try to become intimately knowledgeable about which precision tools must be used to repair each electrical connector, contact and terminal when DMC has already performed this task for the Sikorsky Blackhawk.
AOG TIME CONSTRAINTS.
Once the aircraft becomes inoperable because of a connector failure, it is imperative to be able to replace the connector, contact or terminal as quickly as possible to avoid revenue loss due to AOG. The DMC1907 kit supplies your staff with both the information and the tools necessary to make this type of repair to the Sikorsky Blackhawk in the shortest time possible.
THE DMC SOLUTION…
TOOLING RESEARCH.
DMC has already researched the list of connectors for the Sikorsky Blackhawk and has identified the most common tools required to maintain the electrical connectors. DMC has cross referenced tools to the connectors, contacts and terminals eliminating costly and time-consuming research which would otherwise have to be performed by your local technicians.
IMMEDIATE AVAILABILITY OF TOOLS AND TECHNICAL INFORMATION.
The DMC1907 kit contains the tooling to connector, contact and terminal cross reference information which indicate the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the required tooling.
ALL IN ONE.
Since these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your aircraft to service. Tool kit supplied in 1 five-drawer cabinet and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Charts, and Tool Selection Charts.
DMC1907 TOOL AND ACCESSORY LIST
| 88 | Crimp Tools |
| 6 | In-Service Inspection Gauges |
| 6 | Turret Heads |
| 19 | Positioners |
| 3 | Single Position Heads |
| 19 | Die Sets |
| 11 | Metal Insertion Tools |
| 12 | Metal Removal Tools |
| 98 | Plastic Insertion/Removal Tools |
| 4 | Contact Gauges |
| 3 | Unwired Contact Removal Tools w/ Probes |
| 1 | Wire Cutter |
| 1 | Wire Stripper |
| 1 | Die Removal Tool |
| 1 | Hex Wrench |
| 1 | Wire Harness Spoon |
| 4 | Coaxial Cable Stripper |
| 1 | Cable Tie Tool |
| 1 | Cable Tie Removal Tool |
DMC1907 CONNECTOR COVERAGE
| Aero-Electric | AE776 |
| AMP | JANTX, Terminal Junctions |
| Amphenol | TV, D38999 I & II |
| Burndy | M22TAC |
| Deutsch | AFD, CTJ |
| Emteq | HMS, NFS, NMS, TMS |
| Kings | TNC |
| Leach | Relays |
| Matrix Science | MRTB |
| Nexus | TJ-120 |
| Pic Wire and Cable | TNC |
| Ted Manufacturing | (Custom Connectors) |
| Trompeter | 70/370, 50/350, 150/3150, 450 |
| (Miscellaneous) | CA140266-2 |
| (Miscellaneous) | DMYNO |
| AS7928 | Insulated/Non-Insulated Terminal Lugs |
| AS50151 | 3450 |
| AS81714 | Terminal Junction Modules |
| MIL-C-81703 | Series 3 |
| MIL-DTL-12883 | Relay Sockets |
| MIL-DTL-24308 | D-SUB Miniature |
| MIL-DTL-26482 | Series 2 |
| MIL-DTL-28804 | Rack and Panel |
| MIL-DTL-38999 | Series 1, 2, 3, 4 |
| MIL-DTL-39012 | BNC, N, SMA, TNC |
| MIL-DTL-83723 | Series 3 |
TOOL KIT CONFIGURATION
| Type of Case: | 5-Drawer Kennedy |
| Number of Cabinets: | 1 |
| Color: | Red |
| Type of Construction: | Steel |
| Application: | Sikorsky Blackhawk |
| Coverage: | Airframe Power Connectors |
| Terminals: | Size 12 AWG and Smaller |
| Coaxial Connectors | |
| Type of Inserts: | Unicellular Polyethylene Foam with Die Cut Tool Cavities |
