Description
The DMC7 kit supplies your staff with the tools and accessories necessary for the Mil Spec M83507/11-01. The DMC AF8, qualified to MIL-DTL-22520/1, has virtually limitless application within the specified wire range of 12 through 26 AWG. The 8 impression crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The precision ratchet controls cycling of the tool in both directions of handle movement. This assures the same accurate crimp every time. Positive crimp depth is controlled by an 8 position selector knob conveniently located on the tool frame. The operator simply dials the desired step for the wire being used. This setting can be secured by use of a locking pin or safety wire.
DMC7 TOOL AND ACCESSORY LIST
1 Crimp Tool
2 Turret heads
1 9/64? Hex Wrench
1 In-Service Inspection Gage
TOOL KIT CONFIGURATION
Type of Case Portable
Number of Cases 1
Color Grey
Type of Construction Steel/Aluminum
Application M83507/11-01
Type of Inserts 4101 Fire Retardant Etha
Foam with Die Cut Tool Cavities
